Vienna Timber

Width 18" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width 9" | Height 34.5" | Depth 24"

1 full height door base cabinet with no shelves.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width .75" | Height 96" | Depth 24"

Refrigerator end panel. Both 96" sides are edge-banded.

Width 3" | Height 34.5" | Depth .75"

Base filler. Both sides of the filler will be finished.

Width 30" | Height 15" | Depth 12"

Wall cabinet that has 2 doors and no shelves.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 3" | Height 30" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 23.5" | Height 29.5" | Depth "

Wainscot base panel, to be used on the exposed side of a base cabinet. It will match the door style of the cabinets being ordered.

Width " |Height 4" |Depth "

Roll out tray to be used in a 24" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4".The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 30" | Height 40-5/16" | Depth 19"

Euro style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 11-3/8".