Ready to Assemble Bar Room Cabinets

Width 9" | Height 34-1/2" | Depth 24"

1 door base cabinet with 1 full height door and 1 adjustable shelf. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 1/4" | Depth 3/4"

Batten molding. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 1-7/16" | Depth 1-7/16"

Outside corner molding. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 1/4" | Depth 3/4"

Scribe molding. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 4-1/2" | Depth 5/8"

Toe kick. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 9" | Height 30-1/4" | Depth 13-1/2"

1 door wall cabinet with 2 adjustable shelves. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 9" | Height 35-1/4" | Depth 13-1/2"

1 door wall cabinet with 2 adjustable shelves. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 9" | Height 40-1/4" | Depth 13-1/2"

1 door wall cabinet with 2 adjustable shelves. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 25-5/16" | Height 35-1/4" | Depth 3/4"

Base overlay panel to be used on the exposed side of a base cabinet, 24” deep wall cabinet or next to an appliance. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 42" | Depth 3/4"

Finished panel, edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 29-7/8" | Height 96" | Depth 3/4"

Tall overlay panel to be used on the exposed side of a tall cabinet or next to an appliance. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Touch up kit that will include one finish pen, one fill stick (crayon), one white synthetic pad and a small scrub pad. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*