Onyx Black Shaker

Width 24" | Height 30"

Glass door for a 24"W x 30"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 24" | Height 36"

Glass door for a 24"W x 36"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 24" | Height 42" 

Glass door for a 24"W x 42"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 42" | Height 96" | Depth 3/4"

Plywood edge banded panel that is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 30" | Height 15" | Depth 12"

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 24" | Height 96"

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides.

Width 30" | Height 23-1/2" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23-1/2" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth 1/4"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 33" | Height 34-1/2" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 36" | Height 34-1/2" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 3" | Height 42" | Depth 1-3/8

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.