Pewter Grey Shaker

Width .5" | Height .75" | Depth 96"

Shoe molding that comes in an 8 foot strip.

Width 0.25" | Height 4.5" | Depth 96"

Toe kick that comes in an 8 foot strip. Only the front will be finished, the back, top, bottom, and sides are all unfinished.

Width 09" | Height 34.5" | Depth 24"

1 full height door base cabinet. This cabinet will not come with a shelf.

Width 24" | Height 34.5" | Depth 0.5"

Appliance end panel with a 3" return.

Width 3" | Height 34.5" | Depth 24"

Base column box (will come as one piece).

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth .75"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 5" | Height 10" | Depth 5"

Decorative corbel.

Width 3" | Height 36.5" | Depth 3"

Decorative full leg. The top flat section is 4" and the bottom flat section is 6-1/4". It is trimmable if needed.

Width 3" | Height 36.5" | Depth 2.25"

Decorative half leg. The top flat section is 2" and the bottom flat section is 3". It is trimmable if needed.

Width 3" | Height 84" | Depth 2.25"

Decorative half leg. The top flat section is 2" and the bottom flat section is 3". It is trimmable if needed.