Ready to Assemble Bathroom Vanities & Cabinets

Width 48" | Height 34-1/2" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 6"

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 8" and 12"

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 48" | Height 36" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island.

Width 54" | Height 6"

Valance that can be trimmed up to 6" on either side.

Width 6" | Height 34-1/2" | Depth 3/4"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 30" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 42" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 96" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 5/8" | Height 4-1/2" | Depth 96"

Base board molding that comes in an 8 foot strip. Commonly used as a decorative molding around base cabinets or islands.

Width 1/4" | Height 3/4" | Depth 96"

Batten molding that comes in an 8 foot strip.