Ready to Assemble Bathroom Vanities & Cabinets

Width 3/4" | Height 1/4" | Depth 96"

Scribe molding that comes in an 8 foot strip. Width is 3/4" and it is 1/4" thick. Commonly used to fill small gaps between cabinets and walls. Curved edge will be smooth (there will be no actual ridges in the wood like shown in the schematic).

Width 1/2" | Height 3/4" | Depth 96"

Shoe molding that comes in an 8 foot strip.

Width 1/4" | Height 4-1/2" | Depth 96"

Toe kick that comes in an 8 foot strip. Only the front will be finished, the back, top, bottom, and sides are all unfinished.

Mohawk Aerosol touch up spray can, approximately 13 oz.

Width 24" | Height 34-1/2" | Depth 1/2"

Appliance end panel with a 3" return.

Width 3" | Height 34-1/2" | Depth 24"

Base column box (will come as one piece).

Width 48" | Height 34-1/2" | Depth 1/4"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth 3/4"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

Width 96" | Height 4" | Depth 3/4"

Crown molding. Installed height will be 3-1/8" and installed depth will be 2-5/8" (how far out it will extend from the cabinet).

Width 19-7/8" | Height 4-1/4" 

Decorative accent.

Width 3" | Height 36-1/2" | Depth 3"

Decorative full leg. The top flat section is 4" and the bottom flat section is 6-1/4". It is trimmable if needed.

Width 3" | Height 36-1/2" | Depth 2-1/4"

Decorative half leg. The top flat section is 2" and the bottom flat section is 3". It is trimmable if needed.