Pre-Assembled Laundry Room Cabinets

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 5.25" | Height 12.5" | Depth 4.5"

Medium decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x30 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x36 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x42 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x84 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x90 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x96 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x30 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x36 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x42 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 3" | Height 34.5" | Depth 2.25"

Base plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**