Ready to Assemble Laundry Room Cabinets

Width 3" | Height 42" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 84" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 96" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 39" however it will take up a minimum of 42" of wall space and can be pulled up to 45". This cabinet has 1 drawer and is reversible. The door/drawer width is 14-9/16”, blind opening is 11 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 42 | Height 8" and 12" | Depth -

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 42" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 42" however it will take up a minimum of 45" of wall space and can be pulled up to 48". This cabinet has 1 drawer and is reversible. The door/drawer width is 17-1/2”, blind opening is 14 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 4.625" | Depth -

Scalloped valance.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 8" and 12" | Depth -

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.