Ready to Assemble Laundry Room Cabinets

Width 1.5" | Height 2.25" | Depth 96"

Light rail molding that comes in an 8 foot strip. Commonly used to hide lighting under wall cabinets.

Width 0.25" | Height 0.75" | Depth 96"

Outside corner molding that comes in an 8 foot strip. Commonly used to finish edges on islands or other areas.

Width .75" | Height .25" | Depth 96"

Scribe molding that comes in an 8 foot strip. Width is 3/4" and it is 1/4" thick. Commonly used to fill small gaps between cabinets and walls. Curved edge will be smooth (there will be no actual ridges in the wood like shown in the schematic).

Width 0.25" | Height 4.5" | Depth 96"

Toe kick that comes in an 8 foot strip. Only the front will be finished, the back, top, bottom, and sides are all unfinished.

Mohawk Aerosol touch up spray can, approximately 13 oz.

Width 24" | Height 34.5" | Depth 0.5"

Appliance end panel with a 3" return.

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 19.875" | Height 4.25" | Depth -

Decorative accent.

Width 3" | Height 34.5" | Depth 3"

Decorative leg.

Width 3" | Height 34.5" | Depth 1.5"

Decorative half leg that will be unfinished on the back.

Width 3" | Height 34.5" | Depth 3"

Decorative leg with that comes with a wall filler.