Stone Shaker - Quick Ship

Width 96" | Height 4.5" | Depth .25"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel. Finished on both sides. There is a 3" stile/filler on the front which can be trimmed to 3/4" if necessary.

Width 23.5" | Height 29" | Depth .75"

Base Decorative Door

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23.25" | Height 34.5" | Depth .25"

Base veneered skin.

Width 3" | Height 34.5" | Depth 3"

Classic Decorative Leg.

Width 25.5" (42" wall space on each wall) | Height 34.5" | Depth .75"

Corner sink base front and floor. Finished toe kick is not included. Once installed, this will take up 42" of wall space from the corner out, on each wall. These items should be installed between two cabinets, they cannot be used with an appliance directly on either side. To ensure proper installation, additional countertop support will be needed along the back wall and corner area. Additionally, a base support should be built on-site to provide adequate stability. Please note that hardware is not provided to attach this item to adjacent cabinets due to the flexibility and versatility of the item and how it could be used.

Width 3" | Height 34.5" | Depth 3"

Fluted Decorative Leg.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" high.

Width 3.5" | Height 12" | Depth 9"

Modern styled corbel.

Width 3" | Height 34.5" | Depth 3"

Square decorative leg.

Width " | Height " | Depth "

Touch up kit consisting of stain (or a paint pen for painted cabinets), filler crayon, buffer pad and application card.

Width 3" | Height 12.75" | Depth 5.875"

Traditional corbel.