Catalina Toffee

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 3" | Height 34-1/2" | Depth 24"

Appliance end panel. Finished on both sides. There is a 3" stile/filler on the front which can be trimmed to 3/4" if necessary.

Width 23-1/2" | Height 29" | Depth 3/4"

Base Decorative Door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23-1/4" | Height 34-1/2" | Depth 1/4"

Base veneered skin.

Width 3" | Height 34-1/2" | Depth 3"

Classic decorative leg.

Width 96" |Height 3" |Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3"H.

Width 3-1/2" | Height 12" | Depth 9"

Modern styled corbel.

Width 3" | Height 34-1/2" | Depth 3"

Square decorative leg.

Touch up kit consisting of stain (or a paint pen for painted cabinets), filler crayon, buffer pad and application card.

Width 3-1/8" | Height 13-1/16" | Depth 5-7/8"

Traditional corbel.

Width 20-1/2" | Height 29" | Depth 3/4"

Vanity Decorative Door. The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.