Kitchen Cabinets

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 54" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 18" | Height 54" | Depth 12"

Single door wall cabinet with 2 built in drawers on bottom. Cabinet will come with 2 shelves; drawer glides will not be soft closing. This cabinet will come hinged to the right by default but can be switched to a left side hinge after delivery, if needed.

Width 18" | Height 60" | Depth 12"

Single door wall cabinet with 2 built in drawers on bottom. Cabinet will come with 2 shelves; drawer glides will not be soft closing. This cabinet will come hinged to the right by default but can be switched to a left side hinge after delivery, if needed.

Width 24" | Height 34.5" | Depth 24"

2 door sink base cabinet that comes with 1 false drawer front and no shelves or center stile. This cabinet does have a full 1/2" back.

Glass doors for a wall cabinet that is 24" wide and 30" high. Clear glass is included. The actual cabinet must be purchased separately.

Glass doors for a wall cabinet that is 24" wide and 36" high. Clear glass is included. The actual cabinet must be purchased separately.

Glass doors for a wall cabinet that is 24" wide and 42" high. Clear glass is included. The actual cabinet must be purchased separately.

Width 23" | Height 2.875" | Depth 21"

Roll out tray to be used with a 27" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet that will fit most farm sinks that are 24" to 27" wide. The tallest farm sink that will work with this cabinet is 10-3/4". Doors are each 14-1/2"W x 19"H. The height from the door cutout to the top of the face frame is 11-1/4". The width of the top opening is approximately 23-3/4". The height from the top of the opening to where the horizontal stile begins is 2-7/8", and the stile height is 8-3/8".