Kitchen Cabinets

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width .25" | Height .75" | Depth 96"

Batten molding that comes in an 8 foot strip.

Width .5" | Height .75" | Depth 96"

Shoe molding that comes in an 8 foot strip.

Width 96" | Height 4.5" | Depth 27/32"

Crown molding with egg and dart detail. Installed height will be 3 5/8" and installed depth will be 2 27/32" (how far out it will extend from the cabinet).

Width 14 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 30" base cabinet or sink base cabinet.

Width 16 1/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 33" base cabinet or sink base cabinet.

Width 17 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 36" base cabinet or sink base cabinet.

Width 5" | Height 30" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.

Width 5" | Height 36" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.

Width 5" | Height 42" | Depth 11.5"

Wall end shelf cabinet with 3 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.