Kitchen Cabinets

Width 30" | Height 18" | Depth 12"

Wall open cabinet (will not have doors) with an opening height of 14-1/2". Can also have a Microwave Shelf kit or X-Wine Rack kit added.

Width 36" | Height 34-1/2" | Depth 24"

2 door sink farm sink base cabinet with a trimmable top opening as needed.

• Will fit a sink up to 33"W
• Butt doors measure 19"H
• Top of the doors to the top of the cabinet is 10-1/2"H
• Opening height is 7"
• Farm sinks taller than 10" would require a custom built farm sink using a 24" refrigerator cabinet (please contact customerservice@thertastore.com if your farm sink is taller than 10")
• If your farm sink is 33"W, L-brackets (used to replace the wooden corner supports) should be selected from the options drop down area. These are not needed for farm sinks less than 33"W.

Width 36" | Height 1.5" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 48" | Height 1.5" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 60" | Height 1.5" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 5.5" | Height 29" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5.5" | Height 35" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5.5" | Height 41" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width | Height | Depth

Wall microwave shelf kit to be used with the 30" Wall Open Cabinet (SKU WOC3018 - this cabinet must be purchased separately). The shelf will be 17-1/2" deep however there is a 1" lip on the back making the usable shelf depth 16-1/2".

Width | Height | Depth

Wall x-wine rack kit to be used with the 30" Wall Open Cabinet (SKU WOC3018 - this cabinet must be purchased separately).

Width 36" | Height 34.5" | Depth 21"

Vanity that has 2 false drawer fronts, no shelves and 2 butt doors.

Width 120" | Height | Depth 3/4"

Edgebanding that will come in a 10' roll and will match the sized edges on the cabinet box, doors, panels and fillers. Edgebanding can be applied to the edge of a cabinet box so it matches the door finish instead of the grey linen finish of the cabinet box edging. It can be applied right on the outside of the cabinet box edges using glue. The edgebanding can also be used to cover the edge of any panels or fillers that have been trimmed. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*