Vienna Custom Color

Width 6€ | Height 42€ | Depth 12€

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 23-1/2" | Height 14-1/2" | Depth 24"

Wainscot panel for a 15" high, 24" deep cabinet. This panel is a great option when stacking a 15" high wall cabinet with an increased depth, above a pantry or oven cabinet.

Width 3/4" | Height 34.5" | Depth 24"

Appliance end panel that finished on two sides and edge-banded on 2 vertical (34-1/2”) edges, there will not be a front stile on this panel.

Width 33" | Height 34.5" | Depth 24"

Easy reach corner cabinet that will take up 33" from the corner out, on each wall. Center shelf is adjustable and soft close hinging isn't available with this cabinet. Once assembled, the door cannot be reversed, so be sure to specify left or right hinging (as if facing the cabinet).

Width 37-3/4" | Height 46" | Depth 19-7/8"

Artisan style wood hood that comes with a stainless steel liner. The chimney height can be trimmed up to 12" on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-1/2" and the width is 17".

Width 43-3/4" | Height 46" | Depth 19-7/8"

Artisan style wood hood that comes with a stainless steel liner. The chimney height can be trimmed up to 12" on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-1/2" and the width is 23".

Width 49-3/4" | Height 46" | Depth 19-7/8"

Artisan style wood hood that comes with a stainless steel liner. The chimney height can be trimmed up to 12" on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-1/2" and the width is 29".

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 84"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 90"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 96"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 14.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 43-3/4" | Height 46-3/8" | Depth 19-7/8"

Signature style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 23-3/8".