Midtown Mocha Shaker

Width 36" | Height 2.5" | Depth 10"

Stainless steel floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" | Height 1.25" | Depth 12"

Stemware rack that has 7 slots for glasses.

Width 36" | Height 1.25" | Depth 12"

Stemware rack that has 8 slots for glasses.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 3" | Height 120" | Depth 3/4"

Tall filler. The 2 long sides of the filler will be finished.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 6" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width " | Height " | Depth "

White plastic tilt out tray which can be used in a 30" or 33" sink base (2 can be used per sink base).

Width " | Height " | Depth "

White plastic tilt out tray. 1 tray can be used in a 24" or 27" sink base, or 2 trays can be used in a 36", 39", 42" or 48" sink base.

Width " |Height " |Depth "

White plastic tilt out tray that can be used in a 30" sink base.

Width 96" |Height 4.5" |Depth .25"

Toe kick.