Tuscan Oyster

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 22.625" | Height " | Depth 22"

Large trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 5.25" | Height 12.5" | Depth 4.5"

Medium decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height 1.25" | Depth 1.25"

Outside corner molding. Inside height and depth is 7/8".

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x36 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x42 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x84 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x90 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x96 regular filler (which must be purchased separately). Actual filler width is 2-1/2"