Tuscan Painted Grey

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 9x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 9" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width 9" | Height 42" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 24" | Height 34.5" | Depth 24"

Full height door cabinet that is meant to be used at the end of a cabinet run. It will have a 24" deep side on the right which gets installed against the adjacent cabinet. The door is 16" wide and angled. The exposed side of the cabinet (on the left) will be 12" deep. The door will always be hinged on the 12" deep side.

Width 12" | Height 34.5" | Depth 12"/24" (12" on shortest side and 24" on longest) side

Full height door cabinet that is meant to be used at the end of a cabinet run. It will have a 24" deep side on the left which gets installed against the adjacent cabinet. The door is 16" wide and angled. The exposed side of the cabinet (on the right) will be 12" deep.

Width 96" | Height " | Depth 1.25"

Large batten molding.

Width 96" | Height " | Depth .75"

Small batten molding.