Signature Vanilla Glaze

This restrictor clip will prevent a cabinet door from opening more than 90 degrees (price is per clip and 1 clip is needed per hinge). *Please note, these are NOT compatible with the Salem, Vienna, Midtown, Union, Tuscan and Imperial cabinet collections. See sku BLUM-COMPACT-RES-CLIP-10PK for those collections*

Width 23" | Height 2.875" | Depth 21"

Roll out tray to be used with a 27" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 29" | Height 2.875" | Depth 21"

Roll out tray to be used with a 33" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 4.5" | Depth 27/32"

Crown molding with egg and dart detail. Installed height will be 3 5/8" and installed depth will be 2 27/32" (how far out it will extend from the cabinet).

Width 14 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 30" base cabinet or sink base cabinet.

Width 16 1/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 33" base cabinet or sink base cabinet.

Width 17 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 36" base cabinet or sink base cabinet.

Loud slamming cabinets are a thing of the past with our innovative soft-close base organizers. Designed for a 9" or 12" base cabinet (select size using in the Options drop down menu), it glides effortlessly on our patented soft-close tri-slides which minimize any side-to-side motion and provide complete stability when pulled out of the cabinet. An adjustable rear wall prevents items falling behind the pullout and door mounting is easy with our patented door mount brackets. **Base cabinet must be ordered separately**

Features:

• Adjustable rub bushings
• Adjustable shelves with chrome rails
• Designed for 9" or 12" base cabinets
• Micro-adjustment screw for precise door alignment
• Patented door mount brackets that provide up to 5 inches of flexibility for trouble-free installation on any door style.
• 9" cabinet pullout size: 5"W x 21-21/32"D x 25-1/2"H to 25-1/2"H
• 12" cabinet pullout size: 8"W x 21-21/32"D x 25-1/2"H to 25-1/2"H
• **Base cabinet must be ordered separately**

Specification:

• Minimum Cabinet Faceframe/Frameless Opening: 9" cabinet pullout: 5-1/2", 12" cabinet pullput: 8-1/2"
• Number of Tiers: 4
• Slides: Yes
• Soft Close: Yes
• Gas Assist: No
• Contains Wood: Yes

Use these special cylinders with your cabinet hinges when installing wall cabinets horizontally to allow the door to open with an upward motion and help it stay open with it's lifted. Can be used with any standard single door wall cabinet that is 15" to 21" in width. Price is for 2 hinges.

Width 5" | Height 30" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.