Vail White Shaker

Width 3" | Height 42" | Depth 3/4"

Fluted decorative wall filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 42" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 84" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 96" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 39" however it will take up a minimum of 42" of wall space and can be pulled up to 45". This cabinet has 1 drawer and is reversible. The door/drawer width is 14-9/16”, blind opening is 11 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 42 | Height 8" and 12"

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 42" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 42" however it will take up a minimum of 45" of wall space and can be pulled up to 48". This cabinet has 1 drawer and is reversible. The door/drawer width is 17-1/2”, blind opening is 14 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 48" | Height 4-5/8"

Scalloped valance.

Width 48" | Height 6"

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 8" and 12"

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 48" | Height 36" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island.