Pre-Assembled Office Cabinetry

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 36" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 11.25" | Height 42" | Depth .25"

Wall skin that can be cut to size as needed.

Width 11-7/8" | Height 47.5" | Depth .375"

Beaded panel that has notched sections so multiple panels can be interlocked together. Beads are 1-1/2" wide, center-to-center. The exposed finished area of the panel is 11-7/8" wide but the total width of the panel is 12-7/8".

Width 12" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 15" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 18" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 24" | Height 15" | Depth 12"

Diagonal corner wall cabinet with no shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 22-5/8" and the door width is 14-3/4".