Artisan Walnut Shaker

Width 19.875" | Height 4.25" | Depth -

Decorative accent.

Width 24" | Height 34.5" | Depth 0.5"

Appliance end panel with a 3" return.

Decorative panel for the side of a base cabinet.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative door for the side of a 12" deep by 30" high wall cabinet.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative door for the side of a 12" deep by 36" high wall cabinet.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative door for the side of a 12" deep by 42" high wall cabinet.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative panel for the side of a 24" deep by 84" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative panel for the side of a 24" deep by 90" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Decorative panel for the side of a 24" deep by 96" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Width 36" | Height 96" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.