Brazilian Shaker

Width 24" | Height 36" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 2 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 36" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 2 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 36" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 2 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 36" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 2 shelves.

Glass door for a corner wall cabinet that is 24" wide and 36" high. Frosted glass is included. The actual cabinet must be purchased separately.

Width 24" | Height 42" | Depth 12"

2 door wall cabinet that comes with 3 shelves. This cabinet does not have a center stile.

Width 24" | Height 42" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 3 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 42" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 3 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 42" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 3 shelves. It will take up 24" of wall space out from each corner.

Width 24" | Height 42" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 3 shelves.

Glass door for a corner wall cabinet that is 24" wide and 42" high. Frosted glass is included. The actual cabinet must be purchased separately.

Decorative panel for the side of a 24" deep by 84" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**