Midtown Painted Grey Shaker

Width 30" | Height 36" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 30" | Height 36" | Depth 12"

Wall cabinet with no doors that is designed to be used with glass doors (sold separately). Cabinet will have a finished interior, 3 adjustable 1/4" thick glass shelves, and pre-installed hinges.

Width 30" | Height 36" | Depth 12"

Wall open shelf cabinet with a finished interior. There will be a valance on top and 3 adjustable shelves with an Ogee edge.

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has two 14-1/2" high doors on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width " | Height " | Depth "

Clear glass door for a 30x42 wall cabinet. The glass will be pre-installed. A QUANTITY OF 2 MUST BE ORDERED TO RECEIVE A SET OF GLASS DOORS.

Width 30" | Height 42" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 30" | Height 42" | Depth 12"

Wall cabinet with no doors that is designed to be used with glass doors (sold separately). Cabinet will have a finished interior, 3 adjustable 1/4" thick glass shelves, and pre-installed hinges.

Width 30" | Height 42" | Depth 12"

Wall open shelf cabinet with a finished interior. There will be a valance on top and 3 adjustable shelves with an Ogee edge.

Width 30" | Height 42" | Depth 21"

Microwave wall cabinet that has two 20-1/2" high doors on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width .75" | Height 96" | Depth 30"

Refrigerator end panel. Both 96" sides are edge-banded.

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers.

Width 33" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.