Midtown Cloud Shaker

Width " | Height 4" | Depth "

Roll out tray to be used in a 24" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with full extension, ball-bearing glides (not soft-close). Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 42" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 42" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door in the middle, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the left and right. This cabinet will not have any shelves.

Width 42" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 2 false drawer fronts. This cabinet will have no shelves.

Width 42" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 48" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. This cabinet can be placed all the way in the corner (without any pull) so it would take up 48" of wall space. It can be pulled a max of 3", taking up 51" of wall space. The door width is 21-1/4", the stile width is 7-3/8" and the blind opening width is 18-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x30 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x42 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 6" | Height 30" | Depth .75"

Wall filler. Both long sides of the filler are finished.