Midtown Cloud Shaker

Width 11.25" | Height 30" | Depth .25"

Wall skin that can be cut to size as needed.

Width 11.25" | Height 36" | Depth .25"

Wall skin that can be cut to size as needed.

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width 24" | Height 18" | Depth 12"

Appliance garage with a roll up, tambour door and is designed to fit under a 24" wide wall cabinet.

Width 48" | Height 12" | Depth .75"

Arched recessed panel valance that can be trimmed up to 3" on each side.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 3/4" | Height 34.5" | Depth 24"

Appliance end panel that finished on two sides and edge-banded on 2 vertical (34-1/2€) edges, there will not be a front stile on this panel.

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".