Midtown Cloud Shaker

Width 96" | Height 5.5" | Depth .75"

Straight valance.

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 12" | Height 34.5" | Depth 12"/24" (12" on shortest side and 24" on longest) side

Full height door cabinet that is meant to be used at the end of a cabinet run. It will have a 24" deep side on the left which gets installed against the adjacent cabinet. The door is 16" wide and angled. The exposed side of the cabinet (on the right) will be 12" deep.

Width 96" | Height " | Depth 1.25"

Large batten molding.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x30 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x36 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 24x42 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x30 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x36 diagonal corner wall cabinet. The glass will be pre-installed.

Width 13.5" | Height " | Depth "

Clear glass door for a 27x42 diagonal corner wall cabinet. The glass will be pre-installed.

Width 3" | Height 36" | Depth 3"

Corner post. Height on top of the post will be 4", the bottom height is 6-1/4", 2" must be trimmed from the top or bottom of the post. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**