Milan Cafe

Width 33" | Height 30" | Depth 21"

Easy reach corner cabinet that will take up 33" from the corner out, on each wall. It comes with one adjustable shelf and will not have soft close hinges. The cabinet will have a 21" depth for an easier installation, however due to the smaller depth, it must be pulled out 3" off both walls (thus, taking up 24" of wall space on each wall). This gap will not be visible once countertops are installed. Once assembled, the door cannot be reversed, so be sure to specify left or right hinging (as if facing the cabinet). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 21"

Easy reach corner cabinet that will take up 33" from the corner out, on each wall. It comes with one adjustable shelf and will not have soft close hinges. The cabinet will have a 21" depth for an easier installation, however due to the smaller depth, it must be pulled out 3" off both walls (thus, taking up 24" of wall space on each wall). This gap will not be visible once countertops are installed. Once assembled, the door cannot be reversed, so be sure to specify left or right hinging (as if facing the cabinet). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 24" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 36" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 42" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 48" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 54" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 33" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8" and the height above the doors to the top of the cabinet is 11-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 31-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8" and the height above the doors to the top of the cabinet is 11-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base).The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 34-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 21"

Heat shield that is 1/16" thick powder-coated steel, with dre-drilled installation holed. It will need to be cut to size and must used on either side of a range base cabinet to shield the adjacent cabinet boxes from the oven heat (also recommended to be used on either side of a range top). Sold in quantities of 1, a quantity of 2 must be ordered to received 2 heat shields.