Milan Grey Gloss

Width 30" | Height 30" | Depth 21"

Microwave wall cabinet that has a 8-7/8" high lift-up door on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be appled to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has (2) 14-7/8" high doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 42" | Depth 21"

Microwave wall cabinet that (2) 20-7/8" doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 96" | Height 3/4" | Depth 1-1/2"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for light rail molding (SKU: LRM), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling. It can also be used with the straigh valance (SKU: VST-6) for a Soffit build up.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick.

Width 30" | Height 30" | Depth 24"

Base oven cabinet. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 28-1/2"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will support the range that goes on top of the cabinet. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 36" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will support the range that goes on top of the cabinet. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 48" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*