Milan Hazel

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 33" | Height 30" | Depth 21"

Lazy susan base cabinet that will take up 33" from the corner out, on each wall. Both wooden Lazy Susan trays rotate independently and the center tray is mounted on a 3/4" adjustable shelf. This cabinet cannot use a soft close hinge. Each bi-fold door is 9" wide. It is designed to have a smaller footprint for ease of installation (which is why the depth is 21"). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 21"

Lazy susan base cabinet that will take up 36" from the corner out, on each wall. Both wooden Lazy Susan trays rotate independently and the center tray is mounted on a 3/4" adjustable shelf. This cabinet cannot use a soft close hinge. Each bi-fold door is 12" wide. It is designed to have a smaller footprint for ease of installation (which is why the depth is 21"). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Microwave wall cabinet that has a 8-7/8" high lift-up door on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be appled to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has (2) 14-7/8" high doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 42" | Depth 21"

Microwave wall cabinet that (2) 20-7/8" doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 24" | Height 79-1/2" | Depth 24"

Combo oven cabinet with two 11-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 24" | Height 79-1/2" | Depth 24"

Double oven cabinet with two 11-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 24" | Height 79-1/2" | Depth 24"

Single oven cabinet with two 11-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 24" | Height 85-1/2" | Depth 24"

Combo oven cabinet with two 17-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 24" | Height 85-1/2" | Depth 24"

Double oven cabinet with two 17-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 24" | Height 85-1/2" | Depth 24"

Single oven cabinet with two 17-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.