Lexington Cinnamon Glaze

Width 21.25" | Height 4" | Depth 21"

Utensil drawer for a 24" base cabinet or 24" drawer base cabinet.

Width 27" | Height 34.5" | Depth 24"

Microwave base cabinet with a 24"W x 15-1/2"H opening on top and a drawer on bottom. The top opening will be finished to match the exterior of the cabinet.

Width 96" | Height .75" | Depth .34375"

Single bead insert molding with an 11/32" depth.

Width 96" | Height .75" | Depth .25"

Triple bead insert molding.

Width 96" | Height 2" | Depth .75"

Mirror molding to be used to frame out a custom mirror. The mirrored glass would need to be purchased separetely.

Width 96" | Height .75" | Depth .75"

Decorative inside corner molding.

Width 6" | Height 34.5" | Depth .75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 24" | Height 42" | Depth 12"

2 door wall cabinet that comes with 3 adjustable shelves.

Width | Height | Depth

Aerosol spray can to be used after the Pre-Coat spray (SKU SHELLAC-CAN). Clear-Coat should then be applied after the Aerosol Spray (SKU CLEAR-CAN). See instructional video for how to apply spray, under the Assembly tab on the top of the page.

Width | Height | Depth

Pre-Coat to be used before applying the Aerosol spray (SKU SPRAY-CAN). The pre-coat serves as an adhesion promoter when staining or painting an existing stain or paint. The area must first be scuffed with 400 grit sand paper and then lightly sprayed with the pre-coat. See instructional video for how to apply spray, under the Assembly tab on the top of the page.

Width | Height | Depth

Clear Coat to be used after applying the Pre-Coat (SKU SHELLAC-CAN) and Aerosol spray (SKU SPRAY-CAN) to stained finishes. See instructional video for how to apply spray, under the Assembly tab on the top of the page.

Width 24" | Height 12" | Depth 12"

2 door wall cabinet. There will not be any shelves with this cabinet.