Dakota White

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 8" and 12" | Depth -

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.

Width 54" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 6" | Height 34.5" | Depth 0.75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 34.5" | Depth 0.75"

Fluted decorative base filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 30" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 42" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 96" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 0.625" | Height 4.5" | Depth 96"

Base board molding that comes in an 8 foot strip. Commonly used as a decorative molding around base cabinets or islands.

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".